Wolf CT36G Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Barbrque & Grills Wolf CT36G herunter. Gas Cooktop High Altitude Conversion Kit 807595 - Sub Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Page 1
W
W
olf Gas Cooktop High
olf Gas Cooktop High
Altitude Conversion Package For
Altitude Conversion Package For
8,000 - 1
8,000 - 1
1,000 Feet
1,000 Feet
INST
INST
ALLA
ALLA
TION
TION
INSTRUCTIONS
INSTRUCTIONS
Contents of Package:
QTY DESCRIPTION
3 Jet Holder, High Altitude
1 Venturi, LP, High Altitude
2 Venturi, Large
2 Venturi, High Altitude
1 O-Ring Service Package
1 Conversion Label, High Altitude LP
1 Conversion Label, High Altitude Nat
1 High Altitude Conversion Instructions
Package Number 806079
For use with WOLF Gas Cooktop Models:
CT36G/S CT36G/S-LP
CT36G/P CT36G/P-LP
CT30G/S CT30G/S-LP
CT30G/P CT30G/P-LP
CT15G/S
CT36G/S-2 CT36G/S-LP-2
CT36G/P-2 CT36G/P-LP-2
CT30G/S-2 CT30G/S-LP-2
CT30G/P-2 CT30G/P-LP-2
CT15G/S-2
This conversion package shall be installed by
an authorized service company in accordance
with the manufacturer‘s instructions and
all applicable codes and requirements of the
authority having jurisdiction. If the information in
these instructions is not followed exactly, a fire,
explosion or production of carbon monoxide
may result causing property damage, personal
injury or loss of life. The authorized service
company is responsible for the proper installa-
tion of this package. The installation is not prop-
er and complete until the operation of the con-
verted appliance is checked as specified in the
manufacturer‘s instructions supplied with the
package.
Tools Needed for Conversion:
7/8” Socket and Ratchet
1/2” Open Ended Wrench or Adjustable Wrench
11/32” Open Ended Wrench
#2 Phillips Screwdriver
Before proceeding with the conversion, shut off the gas supply to the
appliance prior to disconnecting the electrical power.
These instructions contain procedural
information to convert a Wolf Cooktop to
operate at an 8,000 – 11,000 ft elevation
on previous listed unit models. This com-
ponent package contains extra components
when converting all cooktops.
Disassembly (Continued)
Cooktop Pan Removal (Continued)
4. The inner distribution ring routes the gas from the simmer orifice
hood to the simmer holes located in the burner head. To remove, lift
the inner distribution ring from the cooktop pan.
5. Disconnect electrode wire from the spark electrode.
NOTE: Mark location of electrode lead with a small piece of tape to
ensure proper placement when reassembling.
6. Lift cooktop pan straight up and off burner box assembly.
Jet Holder w/Orifice Removal
NOTE: Remove only the 9,200 BTU jet holders.
7. The jet holder is mounted to burner mounting bracket on the bottom
of the burner box. The main burner orifice is threaded into the jet hold-
er as well as the venturi. To remove the jet holder, lift off outer distribu-
tion ring from jet holder and move to one side. Then, disconnect the
flexible gas tube that is mounted to the jet holder. Now, extract the nuts
from the pem studs that secure
the jet holder to the burner mounting bracket and lift the jet holder off.
(See Figure 1)
Reassembly
Jet Holder w/Orifice
8. Place new jet holders w/orifices (which were included in the conver-
sion package), at the small 9,200 BTU burner locations. Now, reinstall
and tighten mounting nuts which secure the jet holder to the burner
mounting bracket. Then, place outer distribution rings back on top of jet
holders.
Disassembly
Cooktop Pan Removal
NOTE: For ease of disassembly and reassembly,
remove cooktop from its installation.
1. If converting a LP unit that contains a 15,000 BTU
burner skip to Step 14. There is no conversion neces-
sary for LP units that do not contain a 15,000 BTU
burner. If converting a Nat. gas unit proceed to Step 2.
2. Remove grates, burner heads and control knobs.
3. Remove brass venturi's with a 7/8’’ socket and
ratchet.
NOTE: Once venturi's from the large 12,000 BTU
burners are removed, set aside. These will be reused
for the small 9,200 BTU burners.
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1

Page 1WWolf Gas Cooktop High olf Gas Cooktop High Altitude Conversion Package ForAltitude Conversion Package For8,000 - 18,000 - 11,000 Feet1,000 Feet

Seite 2 - 807595 Revision A • 7/05

Page 2WWolf Gas Cooktop High olf Gas Cooktop High Altitude Conversion Package ForAltitude Conversion Package For8,000 - 18,000 - 11,000 Feet1,000 Feet

Kommentare zu diesen Handbüchern

Keine Kommentare