Wolf Pro Island Hood Spezifikationen PDF herunterladen (Seite 15)

18"

(457)

22"

(559)

24

7

/8

"

(632)

12"

(305)

18"

(457)

8"

(203)

15

Dimensions in parentheses are in

millimeters unless otherwise specified.

INSTALLATION INSTRUCTIONS

IN-LINE AND REMOTE BLOWERS

BLOWER WIRING

IMPORTANT NOTE:

Refer to the specific

installation instructions provided with each

blower for additional wiring instructions.

Follow wiring instructions at the blower as

outlined in the specific installation instruc-

tions provided with each blower. Black (L1)

to black, white (neutral) to white, or white

to blue, or white to brown (depending on

model) and green to grounding screw. Run

blower cable (ROMEX) to the hood.

Insert 30" (762) of ROMEX cable through

the knockout opening and into the electrical

box on the rough-in plate of the hood.

Secure the cable to the electrical box with

an appropriate connector.

Locate the cord assembly provided with the

blower. The cord assembly has two leads,

black (L1) and white (neutral). Connect

these leads to the leads from the blower,

black to black and white to white.

Connect

all

green and bare wires together

to the ground screw in the electrical box.

Plug the cord assembly into the receptacle

located near the center of the hood shell.

Use the clips on the interior of the hood to

keep excess power cord away from moving

parts.

Reinstall the electrical box cover and

screws. Make sure that all wires are secure

and that no wires are pinched between the

cover and box.

IMPORTANT NOTE:

Before turning the power

on to the ventilation hood, make sure the

blower is off.

When making electrical connections,

make sure the electrical power is turned

off at the power source or circuit breaker

before proceeding.

Dimensions for BLOWER-110IL

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare