Wolf AGM60 Bedienungsanleitung PDF herunterladen (Seite 7)

- 7 -

OPERATION

WARNING: THE GRIDDLE AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING,

CLEANING OR SERVICING.

BEFORE FIRST USE

The griddle is shipped covered with a protective coating. Remove this film only when the

griddle plate is being cleaned prior to its first cooking use. Use a non-corrosive, grease

dissolving commercial cleaner, following the manufacturer’s directions. Rinse thoroughly

and wipe dry with a soft clean cloth. Clean all accessories.

SEASONING THE GRIDDLE

Season the griddle to avoid possible surface corrosion before first use, and after every

cleaning. Heat griddle to a low temperature (300-350°F) and apply a small amount of

cooking oil – about one ounce per square foot of surface. Use a soft lint-free cloth to

spread the oil over the entire griddle surface to create a thin film. Wipe off any excess oil

with a cloth. Repeat the procedure until the griddle has a slick, mirror-like finish.

CONTROLS

AGT Models

Each 12” section of the griddle is independently controlled by a thermostatic valve. Turn

the thermostat(s) to the desired setting.

NOTE: The burner is ALWAYS on for an AGT model griddle, which may cause griddle

temperatures to exceed set point during periods of low usage.

AGM Models

Each 12” section of the griddle is heated by a burner with an manual infinite control valve.

Adjust the valve position to the desired setting.

EXTENDED SHUTDOWN

1. Shut off the main gas supply valve.

2. Apply a heavy coat of oil over the griddle plate to inhibit rust.

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Wolf AGM60 Bedienungsanleitung Seite 7