
9
Dimensions in parentheses are in
millimeters unless otherwise specified.
INSTALLATION INSTRUCTIONS
ADJUSTABLE DISCHARGE
Wolf downdraft systems have an adjustable
discharge that will allow you to negotiate
d
ucting around floor joists and other obstacles.
Three different discharge locations are avail-
able with side-to-side adjustment for accurate
a
lignment of ductwork. Refer to the illustration
below for the discharge location and adjust-
ment that best suits your installation.
BLOWER CONSIDERATIONS
The blower will vary in size and is dictated by
the cooking surface, the volume of air that
n
eeds to be moved and the length of the duct
run. A straight, short duct run with a limited
number of elbows and transitions will allow
t
he downdraft to perform most efficiently.
A
remote-mounted blower will minimize the
amount of blower noise, but will not eliminate
the noise completely.
IMPORTANT NOTE:
Blower options vary with
the cooking surface. For recommendations,
refer to the Wolf Design Guide found on the
Wolf website, wolfappliance.com.
DISCHARGE CUT-OUT
DIMENSIONS:
10
1
/4
" (260) x 3
1
/2
" (89)
INTERNAL BLOWER
14
1
/4
" (362) x 3
1
/2
" (89)
IN-LINE OR
REMOTE BLOWER
CENTERLINE OF COUNTERTOP CUT-OUT
16
3
/8
" (416)
INTERNAL BLOWER
21
1
/2
" (546)
IN-LINE OR
REMOTE BLOWER
5
1
/2
" (140)
INTERNAL BLOWER
4
1
/4
" (108)
IN-LINE OR
REMOTE BLOWER
C
L
22
1
/8
" (562)
INTERNAL BLOWER
19" (483)
IN-LINE OR
REMOTE BLOWER
RIGHT
DISCHARGE
LOCATION
LEFT
DISCHARGE
LOCATION
CENTERLINE OF COUNTERTOP CUT-OUT
14
1
/4
" (362) x 3
1
/2
" (89)
IN-LINE OR
REMOTE BLOWER
CENTERLINE OF COUNTERTOP CUT-OUT
5
1
/2
" (140)
INTERNAL BLOWER
4
1
/4
" (108)
IN-LINE OR
REMOTE BLOWER
C
L
NOTE: Measurements are to centerline of duct cut-outs
ADJUSTMENT:
5" MAX (127)
IN-LINE OR
REMOTE BLOWER
ADJUSTMENT:
1" (25) – 7" (178)
INTERNAL BLOWER
2
1
/2
" MAX (165)
IN-LINE OR
REMOTE BLOWER
BOTTOM
DISCHARGE
LOCATION
Downdraft adjustable discharge
Kommentare zu diesen Handbüchern