Wolf PWC362418 Installationsanleitung

Pro Wall Chimney Ventilation HoodsINSTALLATION GUIDEREAD AND SAVE THESE INSTRUCTIONS

Pro Wall Chimney Hood Installation 10IMPORTANT NOTE: For wall chimney hoods using a600 CFM or 900 CFM internal blower, the internal blowermust be inst

Pro Wall Chimney Hood Installation 11wolfappliance.com/specsDuct CoverIMPORTANT NOTE: If an optional duct cover is to be usedwith the pro wall chimney

2) Using the #8 x 2" (51) screws (provided with hood),secure the hood to the wood mounting strip. Refer tothe illustration below.3) Using two #8

Internal BlowersWIRING FOR INTERNAL BLOWER1) Remove the hood electrical box cover. Run Romex®wire from a 120 V AC, 15 amp circuit to the hoodinstallat

BLOWER INSTALLATION (1200 CFM)1) Discard the hex nut provided with the blower.2) Lift the blower assembly into position inside the hood.3) Engage the

Pro Wall Chimney Hood Installation 15wolfappliance.com/specsIn-Line and Remote BlowersWIRING FOR IN-LINE OR REMOTE BLOWER1) Remove the hood electrical

Pro Wall Chimney Hood Installation 16IN-LINE AND REMOTE BLOWER DIMENSIONS18"(457)22"(559)247/8"(632)12"(305)18"(457)8"(2

Pro Wall Chimney Hood Installation 17wolfappliance.com/specsComplete the InstallationINSTALL FILTERSReinstall the internal frame on the wall chimney h

Service Information 18TroubleshootingIMPORTANT NOTE: If the pro ventilation hood does notoperate properly, follow these troubleshooting steps:• Verify

The information and images in this guide are the copyright property of Wolf Appliance, Inc. Neither this guide nor any information or images contained

Important NoteTo ensure the safe and efficient use of Wolf equipment,please take note of the following types of highlightedinformation throughout this

WOLF APPLIANCE, INC. P. O. BOX 44848 MADISON, WI 53744 WOLFAPPLIANCE.COM 800.332.9513817002 REV-A 8/2010

Wolf Pro Wall Chimney Ventilation Hoods 3wolfappliance.com/specsPro Wall Chimney Hood InstallationIMPORTANT NOTE: This installation must be completedb

IMPORTANT INSTRUCTIONSTO REDUCE THE RISK OF FIRE, ELECTRICSHOCK OR INJURY, OBSERVE THE FOLLOWING:•Installation work and electrical wiring must bedone

Installation Considerations 5wolfappliance.com/specsInstallation ConsiderationsWolf pro wall chimney hoods are recommended for usewith all Wolf cookin

Pro Wall Chimney Hood Specifications 6Overall Dimensions18"(457)OVERALLHEIGHT4" (102)24"(610)OVERALL DEPTH131/2"(343)WIDTH MINUS18

Pro Wall Chimney Hood Specifications 7wolfappliance.com/specsInstallation SpecificationsThe illustration below provides dimensions critical forproper

Pro Wall Chimney Hood Installation 8Install DuctworkIMPORTANT NOTE: Pro ventilation hoods must exhaust tothe outdoors.Wolf recommends that the pro wal

Pro Wall Chimney Hood Installation 9wolfappliance.com/specs2" X 4"BLOCKINGWALLSTUDSWOODMOUNTINGSTRIPBACK OFHOOD2" (51)14"(356)16&q