Wolf CTEWH45I Anleitung zur Fehlerbehebung PDF herunterladen (Seite 12)

FIXING TO THE CEILING

Mount the metal panel with four screws as

shown in illus 15.

Using the drilling template, drill the holes for

fixing to the ceiling on the vertical side of your

hood. The center line of the mounting plate

(illus 17) is in line with the center of the control

panel. Carefully observe this indication to

ensure proper alignment of the hood with the

cooking product.

Fix the bracket to the ceiling using the screws

and screw anchors provided as shown in illus

16 and 17.

Note that the position of the bracket deter-

mines the final position of the hood. The side

with the slot (B) corresponds to the side

opposite the controls.

Assemble the plate of the electrical system

fixing it with two screws and two metal

washers as shown in illus 18.

Fix the telescopic flue to the bracket by means

of four screws (provided), running the air evac-

uation pipe through the telescopic flue and the

electric power cable through the special hole

in the bracket as shown in illus 19.

WOLF COOKTOP LOW-PROFILE HOODS

ISLAND HOODS – DUCTED

IMPORTANT NOTE:

This installation must be

completed by a qualified installer or Wolf

authorized service center technician.

Locate the electrical supply through the ceiling

inside the area of the flue.

Install ductwork as outlined on page 7.

Illus. 19

Illus. 17

Illus. 18

Illus. 15

Illus. 16

4.5 x 60mm

3.9 x 9.5mm

M4 x 8mm

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Wolf CTEWH45I Anleitung zur Fehlerbehebung Seite 12