Wolf PL581912 Installationsanleitung PDF herunterladen (Seite 7)

wolfappliance.com/specs

Pro Hood Liner Installation 7

Install Ductwork

10" (254) round, rigid metal duct is recommended for pro

hood liners.

A straight, short run is most effective and will ensure

proper operation. For best results, duct run should not

exceed 50'

(15 m). For runs exceeding 50' (15 m), a higher

CFM blower may be required to maintain proper air flow

and performance. A remote blower installed on a short

duct run may increase the potential for noise.

Internal and in-line blowers require a roof or wall cap (not

provided). Connect ductwork to the cap and work back

towards the hood liner. Use sheet metal screws and

aluminum tape or high temperature duct tape to seal joints

between ductwork sections.

All pro hood liners include a backdraft damper in the tran-

sition assembly. Local codes may require the use of an

additional backdraft and/or make-up air damper. Contact

your local HVAC professional for specific requirements.

Backdraft and make-up air dampers are available through

your authorized Wolf dealer. For local dealer information,

visit the find a showroom section of our website,

wolfappliance.com.

PRO HOOD LINERS

To reduce the risk of fire, use only metal ductwork.

DUCTWORK INSTALLATION

THROUGH ROOF

12" (305)

LINER HEIGHT

12"

(305)

4" (

102)

DECORATIVE HOOD

FOR 19

/4"

31" (787) TO 36" (914)

FOR 22

/2"

30" (762) TO 36" (914)

/4" (489)

LINER DEPTH

/2" (572)

LINER DEPTH

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Wolf PL581912 Installationsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Dunstabzugshauben Wolf PL581912