Wolf TYG48C Bedienungsanleitung PDF herunterladen (Seite 8)

- 8 -

BEFORE FIRST USE

Before leaving the factory the griddle is coated with vegetable oil as a rust inhibitor.

Remove this film when the griddle plate is being cleaned prior to its first cooking use.

Heat the griddle to 200-300°F to loosen and melt the coating, then clean the surface with

a non-corrosive, grease dissolving commercial cleaner, following the manufacturer’s

directions. Rinse thoroughly and wipe dry with a soft clean cloth. Clean all accessories.

SEASONING THE GRIDDLE

Season the griddle to avoid possible surface corrosion before first use, and after every

cleaning. Heat griddle to a low temperature (300-350°F) and apply a small amount of

cooking oil – about one ounce per square foot of surface. Use a soft lint-free cloth to

spread the oil over the entire griddle surface to create a thin film. Wipe off any excess oil

with a cloth. Repeat the procedure until the griddle has a slick, mirror-like finish.

MAINTENANCE

The griddle and its parts are hot. Use care when operating,

cleaning or servicing the griddle

LUBRICATION

There are no parts on this unit that require lubrication.

VENT

Daily, when the griddle is cool, check the flue slots and clear any obstructions.

EXTENDED SHUTDOWN

1. Shut off the main gas supply valve.

2. Apply a heavy coat of vegetable oil over the griddle plate to inhibit rust.

SERVICE AND PARTS INFORMATION

Contact the Service Agency in your area to obtain service and parts information. For a

complete listing of Service and Parts depots refer to or www.wolfrange.com.

When calling for service the following information should be available from the appliance

serial plate: Model Number, Serial Number and Gas Type.

1 2 3 4 5 6 7 8

Keine Kommentare

Wolf TYG48C Bedienungsanleitung Seite 8