Wolf VU24S Installationsanleitung PDF herunterladen (Seite 9)

wolfappliance.com

5 Press the bottom hood assembly against the bottom

hood ange and secure with the six screws. Refer to the

illustration below.

6 Insert the blower plug into the blower receptacle. Refer

to the illustration below.

7 Insert the two tabs on the top of the transformer behind

the two tabs on the hood and secure the bottom of the

transformer with one screw.

INSTALLATION

Installation

HOOD INSTALLATION

1 Insert the power cord above or into an adjacent cabinet.

Place the hood and the bottom assembly on a protected

work surface under the cabinet opening. NOTE: The

electrical connection to the bottom assembly will remain

attached during the installation.

2 Insert the hood into the opening. The support brackets

will temporarily support the weight of the hood. If the

bottom of the enclosure is too thick to engage the

brackets, the hood must be supported until the mounting

screws are installed.

3 Turn the support bracket screws clockwise to draw the

hood ange to the bottom of the enclosure. Refer to the

illustration below.

4 Secure the hood ange to the enclosure using the

mounting screws provided.

SCREW

Hood installation

Install bottom hood assembly

TRANSFORMER

Hood connections

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Keine Kommentare

Wolf VU24S Installationsanleitung Seite 9