Wolf PI363418 Installationsanleitung PDF herunterladen (Seite 14)

Pro Island Hood Installation 14

Internal Blower

IMPORTANT NOTE: R

efer to specific installation instruc-

tions provided with each blower assembly for additional

mounting and wiring instructions.

BLOWER INSTALLATION

1) Discard the hex nuts provided with the blower.

2) Lift the blower assembly into position inside the hood.

3) Engage the two tabs on the blower into the two slots in

the top plate of the island hood. Secure the blower to

the threaded studs with two hex nuts (provided with

blower). Refer to the illustration.

5) Plug the blower power cords into receptacles located

near the center of the hood shell. Use the clips on the

interior of the hood to secure excess power cord.

6) Once installation of the blower is complete, reinstall the

internal frame and filters. Refer to complete the instal-

lation on page 17.

IMPORTANT NOTE: Before turning electrical power on to

the ventilation hood, make sure the blower is off.

THREADED

TUD

HEX NUT

SLOT

TAB

Internal blower.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Wolf PI363418 Installationsanleitung Seite 14