Wolf PI363418 Installationsanleitung PDF herunterladen (Seite 9)

Pro Island Hood Installation 9

wolfappliance.com/specs

Ceiling Framing

IMPORTANT NOTE: A

minimum 10" (254) opening in the

ceiling is required to accommodate the ductwork neces-

sary for proper ventilation.

1) Layout dimensions of the top plate of the hood (or top

of duct cover) on the ceiling. The top plate dimensions

will vary with the width of the island hood. Refer to the

illustration and chart on page 7.

2) Construct the ceiling framing using minimum 2" x 4"

lumber. Proper structural support is required to accom-

modate the weight of the hood.

3) Mark the center location of the hood. Install 2" x 4"

blocking between ceiling joists. Refer to the illustration

below.

4) Drill four

" diameter holes in the framing to match

mounting holes in the top plate of the hood (or top of

duct cover).

WIDTH OF TOP PLATE

2" X 4"

BLOCKING

MOUNTING

HOLES

13" (330)

DEPTH OF

TOP PLATE

Ceiling framing.

Framing must be fastened together and to ceiling joists

to provide enough structural strength to support the

weight of the hood and internal blower, if applicable.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Keine Kommentare

Wolf PI363418 Installationsanleitung Seite 9