Wolf C48SS Spezifikationen PDF herunterladen (Seite 14)

GDV6DIHW\9DOYHRQ6WDQGDUGOYHQ

GDV6DIHW\9DOYHRQCRQYHFWLRQOYHQ

NOTE Safety valve replacement is identical on 30

inch wide standard ovens.

4. Remove screws securing gas safety valve to

mounting bracket and remove the valve. On 24"

standard ovens, spacers are installed between

the valve and mounting bracket. Retain spacers

for reuse. Spacer locations shown in picture

25022 "Gas Safety Valve on Standard 24"

Oven".

5. Remove compression fittings and tubing from

gas safety valve for installation on replacement

valve.

Clean pipe threads and apply thread

sealant that is suitable for use with propane gases.

6. Reverse procedure to install and check for proper

operation.

TO3%URNER3ILOT9AL9E

Disconnect the

electrical power to the machine and

follow lockout / tagout procedures.

Shut off the gas before servicing the

unit.

All gas joints disturbed during

servicing must be checked for leaks. Check with a

soap and water solution (bubbles). Do not use an open

flame.

1. On the module section being serviced, loosen set

screw on top burner knobs and remove knobs

from manual valve.

2. Remove

MANIFOLD COVER.

3. Remove compression nut securing pilot tube to

pilot valve.

4. Remove pilot valve from the manifold.

)LJ

5. Reverse procedure to install.

Clean pipe threads and apply thread

sealant that is suitable for use with propane gases.

Do not over tighten pilot valve or damage

to the threads may ocurr.

6. Check

PILOT FLAME HEIGHT under Open Top

Burner Adjustment.

ENDURANCE / CHALLENGER MODULAR SERIES GAS RANGES - REMOVAL AND REPLACEMENT OF PARTS

F45471 (0913) Page 14 of 33

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 32 33

Kommentare zu diesen Handbüchern

Keine Kommentare

Wolf C48SS Spezifikationen Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Herde Wolf C48SS