Wolf Wall Oven-2 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 30)

30

WOLF BUILT-IN OVEN OPERATION

SELF-CLEAN MODE

WOLF TIPS FOR SUCCESS

F

or Self-Clean mode:

Before using

Self-Clean mode

, remove the

oven racks and oven rack guides. They will

discolor if left in the oven during this mode.

R

emove broiler pan and any other utensil

stored inside the oven.

Remove any moist food or grease from

spillovers before starting this mode.

It is normal to see a brief flame-up, depend-

ing on the amount and content of the soil.

Use this mode as often as necessary. Do

not wait until heavy soil accumulates.

After the mode is finished and the oven

cavity cools, use a damp sponge or paper

towel to wipe up any ash.

You may hear a popping or ”oil canning”

sound during the operation of the oven.

These sounds are normal and are caused

by the expansion and contraction of the

metal surfaces as they heat up and cool

down.

SETTING CONTROLS

F

or Self-Clean mode:

1)

Remove all oven racks and rack guides

before using

Self-Clean mode

.

2)

Touch desired oven

ON

.

3)

Touch

SELF CLEAN

. The control panel will

automatically scroll the following message:

Please remove all oven racks and rack

guides before continuing. Press ENTER

to continue.

4)

Touch

ENTER

to clear the message.

5)

Touch

ENTER

again. Oven door will lock

and remain locked until oven has cooled to

below 300˚F (150˚C). The oven will automat-

ically set for 4 hours. Oven will self-clean

for 3 hours and cool down for 1 hour.

6)

To combine this with

Delayed Start

feature

, refer to page 23.

7)

Touch desired oven

OFF

to clear the display

when oven is finished cleaning.

Never wipe a warm or hot porcelain

surface with a damp sponge. It may

cause chipping or crazing (tiny hairlike

lines).

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare